- Runs sideways along the wall
- Manual or motorised
- Suits low-roof and basement garages
A sliding garage door runs sideways on a track rather than lifting overhead. In Springs it solves openings that defeat the usual doors: garages with no headroom at all, wide openings on smallholdings out toward Welgedag and Modder East, and workshop bays through Nuffield where the ceiling is full of cranes, extraction and services.
Sliding garage doors we supply in Springs
- Single-leaf sliding doors where there is wall space to one side.
- Bi-parting sliding doors that open from the centre on wide openings.
- Folding sliding doors where side room is limited.
- Steel, aluminium and timber-clad leaves depending on the building.
Where a sliding garage door makes sense
The requirement is wall space beside the opening for the leaf to park against. Where that exists, a sliding door needs no headroom whatever, leaves the ceiling completely clear, and handles very wide openings without the barrel and span problems an overhead door has.
Sliding doors in Springs engineering shops
Foundry and fabrication buildings through Nuffield and Casseldale frequently run overhead cranes or extraction ducting across the full ceiling, and an overhead door has nowhere to go. A sliding leaf leaves all of that untouched and covers a wide bay without new steel above the opening.
Sliding doors on smallholdings and implement sheds
Properties out toward Welgedag, Modder East and the smallholding ground east of town run wide implement and workshop openings. A bi-parting sliding door covers those spans cheaply, and it copes with dust far better than a door that has to roll into a barrel.
Track, rollers and the ground
A sliding door is only as good as its track. Top-hung tracks need a lintel or steel that will carry the leaf; bottom-guided tracks need a level, drained threshold. On yards where runoff and grit collect, a bottom track that traps debris will jam, and we specify accordingly.
Automating a sliding garage door
Sliding doors automate well with a rack-and-pinion or belt drive, the same principle as a sliding gate. Safety edges and photocells are fitted because a sliding leaf closes across a path people use. Manual release is standard.
Security on a sliding garage door
Multi-point locking on the leading edge, anti-lift on the rollers, and a track that cannot be jumped. A sliding door secured only at the centre catch is a door that can be levered.
What a sliding garage door costs in Springs
Priced on opening width, leaf construction, track type and automation. We survey the side room and the threshold before quoting, because those decide whether the door is possible at all.
Common questions
About sliding garage doors
When there is no headroom at all and a wall to slide along. The door runs sideways on a track instead of lifting, so nothing occupies the ceiling. Common on converted garages, workshops and buildings with services running under the roof slab.
Roughly the width of the opening, alongside it, kept clear. On a wide opening we build the door in two leaves that part in the middle, which halves the space needed on each side.
Yes, with a sliding gate motor sized for the leaf weight. The track has to be kept clean for it to run reliably, so it suits a covered or paved approach better than an exposed one.
Debris in the bottom track and worn rollers, in that order. Both are cheap to put right if you catch them early; left alone, a door dragging on a fouled track will wear the track itself.
Related
Also worth a look
Insulated Garage Doors
Warmer garage, quieter house
Foam-cored sectional garage doors with thermal breaks and full perimeter seals, for attached garages, converted rooms and bedrooms above the garage.
- 40mm bonded polyurethane core
- Thermal break at every section joint
- Full perimeter seals, all four edges
Fire-Rated Roller Shutter Doors
Certified separation for plant and stores
Fire-rated shutters with the certification your insurer and the fire officer will ask for, quoted as a rated product rather than a substitute.
- Fail-safe gravity descent, no power needed
- Fire panel integration and drop testing
Galvanised Roller Shutter Doors
Hot-dip galvanised roller shutter doors that resist rust in coastal and washdown environments. Manufactured to your opening at our Springs works.